stp:MstDom

A multiple spanning tree instance.

Telemetry Sensor Path(s)

Configurable Properties
PROPERTY NAME DATA TYPE DESCRIPTION PERMITTED VALUES
cfgSt stp:AdminSt
(scalar:Enum8)
Instance config State SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
diameter stp:Diameter
(scalar:UByte)
Network Diameter
RANGE: [2 , 7]
DEFAULT: 2
priority stp:BridgePriority
(scalar:Uint16)
Bridge Priority
RANGE: [0 , 61440]
DEFAULT: 32768
root stp:Root
(scalar:Enum8)
Root Options SELECTION:
1 - primary
2 - secondary
DEFAULT: primary
rootMode stp:RootMode
(scalar:Enum8)
Bridge Root Config mode SELECTION:
0 - disabled
1 - enabled
DEFAULT: disabled
rootType stp:RootType
(scalar:Enum8)
Bridge Root Type SELECTION:
0 - none
1 - primary
2 - secondary
DEFAULT: none
vlanRange stp:VlanBitmap
(l2:VlanBitmap)
Vlan Range Bitmap

Operational Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
bridgeAddress address:MAC
Bridge ID: MAC address Value must match MM:MM:MM:SS:SS:SS format
bridgePriority scalar:Uint16
Bridge ID: Priority with extended system ID RANGE: [0, 65535]
holdTime scalar:Uint32
hold time for the tree RANGE: [0, 4294967295]
rootAddress address:MAC
Root ID: MAC address Value must match MM:MM:MM:SS:SS:SS format
rootPathCost scalar:Uint32
Root path cost RANGE: [0, 4294967295]
rootPort nw:IfId
(base:IfIndex)
Root port name Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100
rootPortNumber scalar:Uint16
Root port ID: Port number RANGE: [0, 65535]
rootPortPriority scalar:Uint16
Root port ID: Priority RANGE: [0, 65535]
rootPriority scalar:Uint16
Root ID: Priority RANGE: [0, 65535]
tcChangeTimer scalar:Uint32
topology change timer RANGE: [0, 4294967295]
tcCount scalar:Uint32
topology change count RANGE: [0, 4294967295]
tcDetected scalar:Uint32
topology change detected flag RANGE: [0, 4294967295]
tcInitiator nw:IfId
(base:IfIndex)
topology change initiator Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100
tcLast scalar:Time
last topology change seconds TIME FORMAT: %H:%M:%S 54:05:07:26.000
tcTimeSinceLast scalar:Time
topology change time since last in seconds TIME FORMAT: %H:%M:%S 54:05:07:26.000
topologyChange scalar:Uint32
topology change flag RANGE: [0, 4294967295]

Internal Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
id stp:MstId
(scalar:Uint16)
Id
RANGE: [0 , 4094]
DEFAULT: 0
modTs mo:TStamp
(scalar:Date)
The time when this object was last modified. SELECTION:
0 - never
DEFAULT: never
status mo:ModificationStatus
(scalar:Bitmask32)
The upgrade status. This property is for internal use only. SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced